posted on May, 7 2011 @ 08:40 PM
Here is what someone said they believe to be in the pic.
1.Metal Hacksaw handle and various blades.
2.Paint can opener, also works as small pry tool.
3.Can of air cleaner missing nozzle. May have been used to blow air or cool if used upside-down.
4.Pick of some sort, probably sharp due to tape over ends. Possible a diddle-stick or spudger.
5.Basic slip-joint pliars.
6.Compound or double-fulcrum cutters, for cutting thick or hard objects. Basically small bolt-cutters. Picture quality is poor, this may be a crimper,
however it looks like it has cutting blades and not a die.
7.Fire extinguisher with platic bottle attached to the bottom. This may be so that the device can be adjusted in height to be able to effectively
wedge between two objects of unknown spacing creating a physically-activated booby-trap or distraction.
8.Seems to be black plastic bags wrapped up with tape, or possibly a black plastic drop-cloth to help contain a mess.
9.Long-shank straight-slot screwdriver. Useful for turning screws as well as prying and poking.
10.Crescent-brand slip-joint (or "Water Pump") pliers wrapped in electrical tape. Also, roll of black electrical tape.
11.Stanly brand 6-in-1 screwdriver.
12.Bag containing: Basic right-handed scissors, generic 11-in-1 screwdriver (possibly containing hollow torx [star point] security bits), various
precision or jeweler's screwdrivers.
13.Looks like a Radio Shack brand motion detector receiver paired with #15 below.
14.Latex finger protectors, possibly to prevent fingerprints without requiring full gloves.
15.Wire-mold brand surface-mount electrical box containing various electronic components. Most likely contains motion detection components and is
probably the guts from a Radio Shack wireless motion detector transmitter paired with #13 above which would be the receiver.