It looks like you're using an Ad Blocker.
Please white-list or disable AboveTopSecret.com in your ad-blocking tool.
Thank you.
Some features of ATS will be disabled while you continue to use an ad-blocker.
update , the guardians siad no more needed siniod and scalar coils . now is more simplerer
Originally posted by fingapointa
Copper and aluminium, hmmm. How is this different from electrolysis?
Originally posted by kosol
as for the alien call guardians , they are my teacher i am a budist so i have clearvovant ability as well telepathtic comunications with the teacher from the galactic federations who is guidiance me on all of this practical simple concept.
Originally posted by kosol
is some simple now. so hang tight cowboys everythings will be undestoods very shotly throught the new vedio.
The energy produced from the Desnity Sphere is "fun" and would seem to contain a high frequency healing crystal component vibration. At present I would class it as angelic female energy.
Originally posted by deezee
These aliens wouldn't happen to be from the Ashtar Gallactic Command and The Brotherhood of Light, would they?
If i become a bhudist, will i be able to communicate telepathycally as well, or would i have to take drugs for that?
Kosols original instructions:
Kosol sent the following instructions:
Ok all of you eager builders of zpe generators from the Rain Maker, here is the spec. I will explain.
1. If you look at the diagram that I attached you will notice that there is a star tetrahedron .
The first tetrahedron is sinoid coils, made of iron bolts10 inches long bought from the hardware store. Wrapped with sinoid 24 gauge coils , then wrapped also with aluminum foil, then wrapped also with another 24 gauge sinoid coils and put into a copper pipe at the same length of 10 inches. Then wrapped also with a another sinoid coils. In all you have 3 layers of sinoid coils. a sinoid coils for example is a regular coils wrap onto a nail, when you were a little kid, to create magnetic fields when 9 volts is applied .). Now you must connect all of these sinoid coils in series to each other. After that you connect the sinoid coils in series with the scalar coils.
2. The other tetrahedron in the star tetrahedron is wrapped with scalar coils. These scalar coils are two, 4 way layers that are 90 degrees and 45 degrees from each other.
You wrap the first four way scalar coils on a bismuth aluminum pipe , and then you put these coils into the copper pipe and then wrap another layer 4 way scalar coils onto the copper pipe, but is 45 degree from the first four layer. Then you must connect this scalar bismuth aluminum copper coils in series to each other and then connected these scalar coils in series to the sinoid coils.
Now you will all know that is star tetrahedron, tetrahedron is in 90 and 45 degree to each other, which this kind of angle will create torsional tempic fields from both the sinoid and scalar coils.
One tetrahedron is all sinoid coils on it, and while the other tetrahedron is all scalar aluminum bismuth copper coils. Together these two tetrahedrons form a star tetrahedron to produce electricity.
Now as you can see we put a geode on the tip of each of the star tetrahedrons .The geode, or rock, must have a dielectric material such as hot glue or electrical tape. Then there must be a one layer of copper foils the top half of the geode rock over the dielectric hot glue material. There must be one layer of aluminum foil on the bottom half of the geode rock over the dielectric hot glue material. You must separate this aluminum hemisphere metal and copper hemisphere metal at the equators to about 2 centimeters apart. This set up will give you lots of ampier. You do this to four of the geodes then the other four geodes you do the same things but you make it multi layer. This means that you add more dielectric layer to the hemisphere and also more layer of aluminum foil. Also you add more dielectric material and more copper foil layers. Like aluminum /dielectric/aluminum/dielectric/aluminum /dielectric /aluminum etc.
The other hemisphere is copper /dielectric/copper /dielectric /copper /dielectric/copper/dielectric /copper etc .
This set up of multilayer hemisphere and dielectric will create a strong voltage.
Remember all builders, the device must charge up for a period of 2 hours to get any reading. The device is very sensitive to human beings and ghosts. It will have its own personality . If you visualized a sun or speak nice to it and recognize it, voltage goes up and ampier goes up , the device will give you that . There is no limit.
Notice also there is a density iron ring in the middle of the device, with magnets. You can put a geode rock in this iron ring also with the hemisphere and dielectric etc.... but you must use hot glue or electrical tape to separate geode rock and hemisphere from the iron density rings. You must have some lead coming out of the sphere so you can hooked up the parallel connection from the hemisphere to hemisphere of parallel connection. Copper to copper and aluminum to aluminum. ok no problem . Remember the coils are connected in series to each other while the hemisphere is connected in parallel to each other.
The single layer hemisphere set up, produce lots of ampier, and the multilayer hemisphere set up, produce lots of voltage , but they all must be connected in parallel to each other , that is connecting the single layer set with the multilayer hemisphere set up, in order to have both voltage and ampier advantage .
The tempic field is created from the coils that in turn create electricity from the geode rock .
The hemisphere takes electric from the geode rocks electrical fields and it comes out as alternative current with lots of amipiers .
The device has no input source, the device takes energy from the tempic fields which is generated from coils and scalar coils .Power from nothing, that is indeed a zero point energy .
The device will grow in power , for example, if it sits there it will gain power and voltage if there is more then one person around it , or like 3 or 6 people around it , the device voltage and ampier go up immediately. It is very interactive and will respond to audio , metal , intention, command and request. Be warned, don't get mad or curse at the device it has feelings and will shut down and will cry and hurt feelings, the device is very very feeling and audio , mental , and intentional and visualizational sensitive .
No limit whatsoever , remember this alien technology comes from the Galactic Federations of Light and the Guardians force.
Regards,
Kosol Ouch
Originally posted by Sri Oracle
Not every doctor has good hand writing... and not every zero-point inventor can spell... no reason to discount a claim. Have you considered that english is not his first language?
Originally posted by Sri Oracle
I am a shaman... I can to some degree communicate telepathically... there are certain substances which can augment this ability... what does that have to do with kosol's device though?
Originally posted by Sri Oracle
You might just become buddhist by default.
Originally posted by Sri Oracle
I live under high tension lines with a constant 4-7 milligauss field. How would your device function in such a place?