It looks like you're using an Ad Blocker.

Please white-list or disable AboveTopSecret.com in your ad-blocking tool.

Thank you.

 

Some features of ATS will be disabled while you continue to use an ad-blocker.

 

Can we sum up facts that 911 was an inside job

page: 1
0

log in

join
share:

posted on May, 3 2006 @ 10:06 AM
link   
Can we sum up 1000s of pages of material in one simple post.

My personal favourite: flying a 767 in to a building is harder than people realise. It is even harder if you fly in a bank angle, flying into a building while turning, it requires great skill, something that only pilots know (i am a pilot). Turning and aiming aircraft it is not like turning and aiming a car to hit target, complex aerodynamics involved, it is very hard and requires skill that Arabs in question simply did not have.

Fly by wire technology was used to take control of the aircraft, block cockpit access to controls, and fly aircraft into the buildings. It was done from a remote location. On the day i remember reading somewhere that someone picked up signals in the air frequency matching fly by wire technology.

Buildings were demolished. There are several pictures on the internet, my favourite is the one where you see "line" of smoke blowing out the windows just as the towers were collapsing, you can see similar lines forming on other floors below as the buildings were collapsing. Perhaps someone could find the pictures?

Demolition experts state: buildings were demolished or collapsed in a control demolition fashion, interviews were made shortly after collapse. Days later those who said that were seen again on TV saying they made a "mistake". Yeah...

And finally, the man himself, Usama Bin Laden, was heard repeatedly denying that he had anything to do with the attacks, until CIA fabricated his videos.

Anything else?

Edit:
Don't we forget that the left overs from demolition, were all taken care of long before anyone had a chance to examine them!!! I think clean up was all carried away and nothing left to check for explosives!!



[edit on 3-5-2006 by Freeman]



posted on May, 3 2006 @ 10:17 AM
link   

Originally posted by Freeman
, it is very hard and requires skill that Arabs simply did not have.


Right,

I'm sure the comercial and military pilots of Arab descent would disagree with you.




Fly by wire technology was used to take control of the aircraft, block cockpit access to controls, and fly aircraft into the buildings. It was done from a remote location. On the day i remember reading somewhere that someone picked up signals in the air frequency matching fly by wire technology.


That is not how Fly by Wire works, please do some basic research before you post such things.


en.wikipedia.org...

A fly-by-wire system literally replaces physical control of the aircraft with an electrical interface. The pilot uses a joystick to fly the plane, and his commands go through an electronic interface to operate actuators at each control surface. Those actuators initially were often hydraulic, but in recent years fully electric actuators have been investigated.



posted on May, 3 2006 @ 11:12 AM
link   

Originally posted by LeftBehind

That is not how Fly by Wire works, please do some basic research before you post such things.



I know exactly how fly by wire works. What you said is only 1 part of its function. It is also possible to take remote control of the aircraft with this technology.


As for Arabs, i edited the post, i meant Arabs who were supposedly piloting these planes.



posted on May, 3 2006 @ 11:28 AM
link   


Buildings were demolished. There are several pictures on the internet, my favourite is the one where you see "line" of smoke blowing out the windows just as the towers were collapsing, you can see similar lines forming on other floors below as the buildings were collapsing. Perhaps someone could find the pictures?


Are these the lines you're talking about? They're called 'squibs' in the demolition trade.





posted on May, 3 2006 @ 11:33 AM
link   
If you took one thing at a time, they may be explained away. Take it as a whole and you can't deny it, even though many people have. At this point anyone who says that the gvt didn't have a hand in the situation is lying to themselves because it would make everything they thought they believed in crumble. Some people just can't give up the illusion.



posted on May, 3 2006 @ 11:45 AM
link   
Well said Rasobasi420


And no! I saw better pictures! Theres just one puff of smoke, i saw where theres a straight line horizontaly, from one side of the buidling to another.



posted on May, 3 2006 @ 11:57 AM
link   
*sing* Oh No, Not Again....

The truth will never be known... EVER.



posted on May, 3 2006 @ 04:11 PM
link   
Those Arab terrorists sure are crafty buggers aren't they? Getting WTC to shut it's securty system down the weekend before 9/11 and planting those internal explosives. All you have to do is ask anyone who was there and they will even tell you they heard multiple explosions that brought the buildings down. I guess the 9/11 commission had it's head up it's arse when it thinks that planes blow up an hour after they already blew their load in the building.

I wish that people would just wake up already. Alot of people here have but so many still can't understand what it means to deny ignorance.

People seriously. Get your heads out of the sand before you have an RFID chip in your arm. You aren't going to like that are you? You aren't going to like surrendering freedom for security because you'll never get it back.

Oh no it's not possible for the government or a small portion of it to harm it's own citizens. Oh no it will never happen here the government loves me... If thats what you think you've been had and are going to be sorry. We don't have any time left. Look at the situation with Iran. It's finished. The drums are pounding and this world is going off to war. Make the wrong choice and your going to be fighting for a rich man and an oil field instead of your family and your neighbour.



[edit on 3-5-2006 by Crazy_Mr_Crowley]




top topics



 
0

log in

join