It looks like you're using an Ad Blocker.

Please white-list or disable AboveTopSecret.com in your ad-blocking tool.

Thank you.

 

Some features of ATS will be disabled while you continue to use an ad-blocker.

 

My discovery about magnetic current and anti-gravity

page: 2
11
<< 1   >>

log in

join
share:

posted on Feb, 12 2012 @ 11:55 AM
link   
reply to post by butcherguy
 


Each pole has both large and small particles. The large ones fall off to displace the mass. The energy becomes less and less , though in higher velocity (superconductivity frameworkd (m9 matrix of space/time))

It would look invisible, but feel heavy like water.

In a 3m factory a man tried to walk under a roll dispensing plastic, only to find he was blocked by a force-field.
It only happens when the air is humid. This roll weighs in at over 2 tons or something. It uses layers of humidity to work as a zero point energy system, separating mass from energy when water is magnetically polarized to center of rotation.



posted on Feb, 12 2012 @ 12:22 PM
link   
reply to post by mikefromspace
 


Your English is kind of lacking which makes reading your first post difficult at best and gibberish at worst. If you're seeking help from people in order to build the machine you'll need to be much more clearer and visual in nature. Especially if you're going with the open sourcing path. I lost count of the amount of content online from people with their own "theory of everything" without anything to back it up.
I also believe very little people are interested in yet another wacky unification theory if there's not a device or machine to back it up. Build it and if it works then you can explain it however you feel like.

Humans are creators so create first use words later
.



posted on Feb, 12 2012 @ 04:35 PM
link   
reply to post by Qumulys
 


Yes i post my work on youtube, the channel is mikefromspace. Just 'google' mikefromspace and you'll find my channel.



posted on Feb, 12 2012 @ 07:13 PM
link   


It would look invisible, but feel heavy like water
reply to post by mikefromspace
 

So, it Would look like if it actually happened.....



posted on Feb, 13 2012 @ 05:38 AM
link   
Mike, i'm not sure i understand your explanation here, but i will read all in due course.
As you may know, i have been researching this for donkey's years.
There is definitely something there, and because it's so hard to detect, many think it's not there.

I call it 'the ghost in the machine'


What i can tell you is this; charge plays an important role, if you set up a VERY steep field gradient, gravitational effects are observed, and they are pretty strong effects.

Imagine a capacitor having one plate 10 CM square (10,000 sq.MM) and the other plate is 1 sq. MM.
Now charge them to 50,000 volts, the field gradient is so steep that a thrust will be observed in the direction of the + plate, being the bigger one. The clue is in the Dielectric (whatever is between the plates).

The magnetic action is far more complex, but results in this same unequal charge distribution, and here's the clinker: The mass itself, while being charged, exerts this force. The greater the mass, the greater the force.
This is (from T.T.Brown) watt for watt, at least 7,000 times more efficient than a jet engine.
Thus, using a hand-cranked device generating about 50 watts, you could (in theory) levitate a 5 ton block.....

Is it possible using just magnets? I don't know, but i know it is possible.......
S&F



posted on Feb, 13 2012 @ 08:04 AM
link   

Originally posted by mikefromspace
In a 3m factory a man tried to walk under a roll dispensing plastic, only to find he was blocked by a force-field.
It only happens when the air is humid. This roll weighs in at over 2 tons or something. It uses layers of humidity to work as a zero point energy system, separating mass from energy when water is magnetically polarized to center of rotation.


I have seen measurements in MV caused by the unrolling of plastic film without adequate static countermeasures.

I couldn't comment on how this could cause a force field effect myself.



posted on Feb, 13 2012 @ 03:36 PM
link   
reply to post by EasyPleaseMe
 


If the man himself was unknowingly charged up to several million volts, then he would indeed have been repelled by the several million volts on the clingfilm.
Either that, or he just walked into some clingfilm, which is also a kind of 'invisible force field'

I have had some nasty static shocks working with granules for plastic injection moulding machines.
Everything must be earthed.
Having said that, i managed yesterday to electrify an entire room with 100Kv at 100Hz, including the radiators, which were earthed

Cool

edit on 13-2-2012 by playswithmachines because: Addenum



new topics

top topics



 
11
<< 1   >>

log in

join