It looks like you're using an Ad Blocker.
Please white-list or disable AboveTopSecret.com in your ad-blocking tool.
Thank you.
Some features of ATS will be disabled while you continue to use an ad-blocker.
simple and cheap colloidal silver maker - $2
page: 15
share:
VERY SIMPLE AND CHEAP colloidal silver maker
Go out and buy any solar garden light for $1 or $2 from a dollar store, snip of the led bulb and attach the wires to your silver rods and put in a jar which has been filled with just boiled water.
cover the solar cell with cardboard,etc to activate or just leave it and it will make colloidal silver at night and charge the solar garden lights internal battery during the day.
you can if you wish leave the led light in series as a visual indicator of current passing through the water.takes a bit longer then.
for a 1.5 litre jar can take from 3 to 6 hours to make colloidal silver.
i have checked that the output voltage of these solar garden lights is 5 to 12 volts pulsed dc or a/c at a frequency of 80 kilohertz to 500 kilohertz.
they have automatic voltage regulation ,if too much current is drawn the voltage falls automatically.
the average current flow is 200 to 300 microamperes. (0.2 to 0.3 milliamps)
you will get very fine silver due to the low current and pulsed high frequency.
any comments?
Go out and buy any solar garden light for $1 or $2 from a dollar store, snip of the led bulb and attach the wires to your silver rods and put in a jar which has been filled with just boiled water.
cover the solar cell with cardboard,etc to activate or just leave it and it will make colloidal silver at night and charge the solar garden lights internal battery during the day.
you can if you wish leave the led light in series as a visual indicator of current passing through the water.takes a bit longer then.
for a 1.5 litre jar can take from 3 to 6 hours to make colloidal silver.
i have checked that the output voltage of these solar garden lights is 5 to 12 volts pulsed dc or a/c at a frequency of 80 kilohertz to 500 kilohertz.
they have automatic voltage regulation ,if too much current is drawn the voltage falls automatically.
the average current flow is 200 to 300 microamperes. (0.2 to 0.3 milliamps)
you will get very fine silver due to the low current and pulsed high frequency.
any comments?
edit on 17-4-2011 by beckybecky because: corrected title
Good thread - especially if it get people to take a look at this fantastic natural mineral of which our bodies are so short of.
However one thing you have stated is that you can use ordinary boiled water - this is not the case.
It is vital that distilled water is used and even the purity of the distilled water is important. The quality of the Colloidal Silver is crucial for it to work.
Please read up on this before advocating making your own.
Good point about making a home made meter and it is easy and cheap to make your own.
S&F for highlighting this miracle cure, that I have used for years for all kinds of things.
However one thing you have stated is that you can use ordinary boiled water - this is not the case.
It is vital that distilled water is used and even the purity of the distilled water is important. The quality of the Colloidal Silver is crucial for it to work.
Please read up on this before advocating making your own.
Good point about making a home made meter and it is easy and cheap to make your own.
S&F for highlighting this miracle cure, that I have used for years for all kinds of things.
reply to post by Seekeye2
Agreed, for ingestion distilled or well purified water is essential otherwise you can get some nasty salts forming that you don't really want to drink. Using mineral water is not recommended for drinking.
Probably fine for topical use and sterilising things tho...
I have a "silver well" and it is an awesome little tool...
Agreed, for ingestion distilled or well purified water is essential otherwise you can get some nasty salts forming that you don't really want to drink. Using mineral water is not recommended for drinking.
Probably fine for topical use and sterilising things tho...
I have a "silver well" and it is an awesome little tool...
reply to post by beckybecky
As soon as I feel a sore throat, gargling this a couple of times banishes it to the fantasy realms.
I cannot recommend it highly enough...
As soon as I feel a sore throat, gargling this a couple of times banishes it to the fantasy realms.
I cannot recommend it highly enough...
edit on 17-4-2011 by trouble_every_day because: (no reason given)
reply to post by trouble_every_day
the place i stay has very pure water.so boiled water is adequate.
my cs is very clear and shows tyndall effect when light beam is shone but is otherwise very clear.
this is due to low current and the pulsed current resulting very low particle size.
some people use 20 to 50 volts and other ridiculous high voltages and high currents like 10 to 20 milliamps and then get runaway reactions or electrolysis effects,and get yellow or golden cs with large particle size.
always keep current less than 0.3 milliamps and use lower voltages. from 2.4 to 6 volts max.most mobile chargers are 4.5 volt to 6 volts.put a resistor in series to limit current to 0.3 milliamps using I=V/R.
the solar light circuit produce pulsed current keeping particle size very small.
or just use cheap batteries.
the solar garden light produces 7 to 12 volts but when in water the voltage falls to about 5 to 6 volts as it is self regulating.
these were measurements taken using a digital multi meter.
the place i stay has very pure water.so boiled water is adequate.
my cs is very clear and shows tyndall effect when light beam is shone but is otherwise very clear.
this is due to low current and the pulsed current resulting very low particle size.
some people use 20 to 50 volts and other ridiculous high voltages and high currents like 10 to 20 milliamps and then get runaway reactions or electrolysis effects,and get yellow or golden cs with large particle size.
always keep current less than 0.3 milliamps and use lower voltages. from 2.4 to 6 volts max.most mobile chargers are 4.5 volt to 6 volts.put a resistor in series to limit current to 0.3 milliamps using I=V/R.
the solar light circuit produce pulsed current keeping particle size very small.
or just use cheap batteries.
the solar garden light produces 7 to 12 volts but when in water the voltage falls to about 5 to 6 volts as it is self regulating.
these were measurements taken using a digital multi meter.
edit on 17-4-2011 by beckybecky because: elaboration. extra DIV
Why do we want to turn blue?
I'm just being ironic, you ingest fine silver for your good health, but look like death
To add, interesting thread OP.
I'm just being ironic, you ingest fine silver for your good health, but look like death
To add, interesting thread OP.
edit on 17-4-2011 by smurfy because: Text.
reply to post by smurfy
There certainly was a case of a man turning blue and this happened about 30 years back but they fail to mention when scaremongers jump on this that the guy was drinking half a bottle per day - he was blue but said he hadn't felt to well.
BParma wants to frighten people away from this because it works and it works for so many things so effectively that it would actually threaten their sales.
They are trying to ban it in so many countries so learn how to make your own quick.
There certainly was a case of a man turning blue and this happened about 30 years back but they fail to mention when scaremongers jump on this that the guy was drinking half a bottle per day - he was blue but said he hadn't felt to well.
BParma wants to frighten people away from this because it works and it works for so many things so effectively that it would actually threaten their sales.
They are trying to ban it in so many countries so learn how to make your own quick.
reply to post by beckybecky
I get all of it but the silver rods part...
where do i get those?
and do you have a picture i can see?
I get all of it but the silver rods part...
where do i get those?
and do you have a picture i can see?