It looks like you're using an Ad Blocker.

Please white-list or disable AboveTopSecret.com in your ad-blocking tool.

Thank you.

 

Some features of ATS will be disabled while you continue to use an ad-blocker.

 

The WTC was Pre-Rigged with Explosives as a Safety Precaution

page: 11
20
<< 8  9  10   >>

log in

join
share:

posted on Aug, 23 2018 @ 11:07 AM
link   
a reply to: micpsi

What do you no understand that even if the floors didn’t “pancake”, the air was still being displaced by 1,000s of tons of collapsing building. In about 10 seconds, 1,000,000 cubic meters of air was displaced?

We know the floor system left the vertical columns standing in the wake of its collapse. Long lengths of vertical columns remained standing whole seconds after the complete collapse of the floor system. CD’s take out the path of greatest resistance. The Towers fell through the path of least resistance.

The “lateral” ejection is easily addressed by vertical columns toppling outward. Or the falling mass acting like billiard balls. Bouncing off structural components that did not immediately collapse, or collisions within the actual falling mass.

Can you cite any evidence of detonations with the power to cut steel? No echoes of detonations bouncing around. No audible signature of detonations with the power to cut steel. No flashes. No signs of metal shards being ejected at 140 km/h from buildings not prepared to capture shrapnel from detonations.



Australian demolition kills young onlooker

www.cnn.com...

Carnell said the company in charge of the demolition of the capital's old hospital had said debris would be confined to within 50 yards of the site, and a 200-yard exclusion zone had been set up for added safety.

The girl killed by the flying debris was standing in a park about 400 yards across a lake from the hospital. Witnesses said debris was sent flying more than 500 yards from the blast site.

Debris rained down

"There was all this shrapnel raining across the lake in front of us," said Innes Willox, a Foreign Ministry spokesman who was standing in the worst hit area with his family.




m.youtube.com...

Couple Nearly Killed By A Flying Rock From Building Demolition


There is no evidence of detonations cutting steel or the structures at the WTC
edit on 23-8-2018 by neutronflux because: Added and fixed



posted on Aug, 23 2018 @ 11:11 AM
link   
a reply to: micpsi

Ho do you have “high powered explosions” capable of cutting steel with no audible detonations. Hint, you don’t.
edit on 23-8-2018 by neutronflux because: Added and fixed



posted on Sep, 1 2018 @ 07:02 PM
link   
a reply to: Shadow Herder

They didn't topple like a tree.



posted on Sep, 2 2018 @ 08:36 AM
link   

originally posted by: neutronflux
a reply to: micpsi

Ho do you have “high powered explosions” capable of cutting steel with no audible detonations. Hint, you don’t.


It's that new super secret explosive that doesn't make any noise. You know, that stuff that Boris and Natasha were after. What was the name? .................I remember now Hushaboom.



posted on Sep, 2 2018 @ 09:45 AM
link   
a reply to: JIMC5499


No, no, it was the high explosive that William Rodriguez and others experienced in the basement area just moments before the plane strike. The one recorded (were there 2?) by seismographs and discussed by Gordon Ross and Craig Furlong years ago.



posted on Sep, 2 2018 @ 04:43 PM
link   
a reply to: Salander

There was not the right type of waves captured indicative of an explosion.

How would you know the timing.

How did an explosion not show signs going up the structure if it compromised the core.

And the collapse was initiated tens of minutes later by the bucklinging of the outer columns some 70 to 80 floors above the ground to start the collapse in localized areas relative to the jet impacts?

Only to have video evidence showing the vertical columns remained standing in long lengths after the complete collapse of the towers’ floor system?
edit on 2-9-2018 by neutronflux because: Added and fixed




top topics
 
20
<< 8  9  10   >>

log in

join