It looks like you're using an Ad Blocker.
Please white-list or disable AboveTopSecret.com in your ad-blocking tool.
Thank you.
Some features of ATS will be disabled while you continue to use an ad-blocker.
Originally posted by Desert Dawg
A few years back, motorcycle (offroad) enduro riders wore a cotton jacket that was waterproofed with what Americans call paraffin.
(The white wax that home canning people use to seal the tops of home-made jams and jellies.
Worked quite well and was a standard for UK motorcyclists who used their bikes for everyday transportation.
The material on the outside was called "waxed cotton."
Barbour was the brand name if I remember right.
A little break-in was required, but after that only reasonable care was required.
I still have a nylon Malcom Smith (brand name) enduro jacket.
Nylon outer and nylon lined, but not insulated.
Stayed warm enough at speeds up to 60 mph or so and wearing a T-shirt and sweatshirt underneath along with a knit wool watchcap under your helmet was good for mountain riding in light-moderate snow conditions.
Lots of pockets, but a lot of Velcro on the pocket closures.
Nice part with is the Velcro sleeve adjuster to keep the wind out as well as a priest type collar with Velcro adjuster.
The front zipper also has a Velcro retained wind flap across the front of the zipper.
Length is about crotch level.
Comes with an adjustable nylon belt that adjusts and has a military type insert & twist buckle.
Nice bit with the belt is that you can ride with the front zipper open all the way and the buckled belt keeps the flapping to a minimum.
You can take it off, roll it up a touch and keep it on your person with the belt.
They came - still do? - in many colors and except for the fact that mine is red could do the trick.
The Barbour enduro jacket noted above is olive drab and probably quieter than the nylon style that copies the Babour.
[edit on 7-1-2009 by Desert Dawg]
[edit on 7-1-2009 by Desert Dawg]