Magnetic Gold and Silver

Magnetic Gold and Silver

An international team led by Physics and Chemistry teams from the Faculty of Science and Technology at the University of the Basque Country (UPV/EHU) and directed by Professor Jose Javier Saiz Garitaonandia, has achieved, by means of a controlled chemical process, that atoms of gold, silver and copper - intrinsically non-magnetic (not attracted to a magnet) - become magnetic. The article has been published in the February issue of Nanoletters (Vol.8, No. 2, 661-667 (2008)).


....snip....


This discovery goes beyond the mere fact of converting non-magnetic elements to magnetic ones. These properties appear in smaller-sized particles that have never been seen in classical magnetic elements. In fact, they can be considered as the smallest magnets ever obtained.

Moreover, such properties do not occur only at low temperatures but they are conserved, apparently without any degradation, at temperatures well above the ambient ones.

This work poses new questions as regards what have been the accepted up to now as the physical mechanisms associated with magnetism and opens the doors to interesting applications yet to be discovered, some of which are related to the use of magnetic nanoparticles for the diagnosis/treatment of illnesses. Likewise, this article is destined to be a point of no return for research into fundamental questions about magnetism.

The last sentence says it all.

We are getting closer to correcting some major flaws in our models of the cosmos, and electricity.

I hope great things come about with this and many more trends in science. just lately i've seen hopes of progress with magnetic plastics,the research into the natural batteries that occur around molecules(giving photosynthesis),and a hopi prophecy of power from earths megnetism.

I hope to delve into the work of Nathon B.Stubblefield,he and others were on to something that may change the world as we know it.

Very interesting phenomenon. I'll try to see the mechanism for this magnetism.

reply to post by fuelcell


Ahh...good to see you here. If you can help me understand this phenomenon a little better, that would be great. That is why i bring this stuff here.

@ All

Great Example Of MONO atomic atoms! Some alchemists call it the elixer of life when properly prepared. Many cultures have considered this Occult knowledge yet it was just a long, extremely long way of making a monoatomic elements. Now they can do it in the lab. Cool .. this means room temp superconductors here we come!!!!!
Joe

reply to post by Localjoe3


Room temp semiconductors are already here. The best part: they are also excellent batteries, making them capacitors as well.

They are made of paper, primarily, with long strand carbon nanotubes.

Now, imagine this:

You have millions of tiny nanogenerators in a highly organized grouping of panels on your wall. Maybe you even build the wall out of these nanogenerator panels.

The house generates its own electricity. Multitune the generators to pick up on a wide variety of acoustic vibration as well as RF. This will increase overall efficiency of the system.

Use thermoelectrics on the outside of the house, capitalizing on the temperature difference between the soil 3 feet deep, and the roof. You could even use some of the newer, cheaper nano engineered solar cells on the roof.

All of this is funneled into the "paper battery", which is extremely cheap, and can help ensure adequate energy storage for "peak" times. The power in the batteries does not dissipate like current cells do, so you can set your own capacity and trust on its reliability.

There are countless options coming forward form the world of nanotech. I have threads on all the concepts listed above (except the paper battery...i need to make one for that.

I see I'm out of my league here,but always fun to learn more.I've heard of the paper battery but as just an aside to other developments.

Wish i had writen down the name of the scientist i saw on t.v yesterday with the(water as a battery thesis),he said he was told as a young researcher to not delve into the science of water(it has ruined my men since all was known),his studies show that contrary to popular belief water has the the state of being crystal around molecules(-)crystal membrane(+)water,making the (like-likes-like)saying ultimately profound as to everything that transpires on this planet working as a battery at some scale.

reply to post by mule skinner


I would be interested to see what you can start to dig up on Stubblefield. Never heard of that one before, but you are correct in saying "he was on to something".

Very interesting.

Iwas taken by the story of his death,found days after death in a warm cabin with no other heat other than what seemed to be two polished copper disks aimed at each otherand the eerie glow on his property that persisted sometime after they disconected the arc lamps that seemed to be wired to his tree roots.

Would love to see what they have in the museum,but sounds like they didn't think before they tore stuff apart.

@bigfatfurrytexan Muleskinner and all LINKS AT BOTTOM
LAUGHING HYSTERICALLY.. Have i got something for you
heres the long and short. We started with a galvanic table and different metals in either sheet or rod form . The farther apart on the table the better the resultant voltage. A few here have successfully isolated cells meaning two pieces of metal with a flower pot, but those were our early experiments. A side focus has been constant throughout on the Nathan Stubblefield "Earth Battery" and wireless phone system. In the past few months our main focus has been on the Stubblefield earth Cell and the results have improved greatly. Make sure to not get confused when reading the bedini page and others about this cell because half of them are wrong and cant read. After exhausting reading of this patent we all came to a better understating of it and built our cells from that principal. He describes two physical devices in this patent. The cool part is this cell has great potential.

"The Primary" Coil is a bifilar wind of iron/steel wire and copper wire wound on a zinc or iron bolt/ threaded rod. The primary wires are insulated from the bolt/core with cloth as well so no electrical connection is made. The wires wound side by side all the way down and then back up no 90 degree cut like one would use in other circumstances. The iron wire must be insulated with cloth or fabric eg something water permeable , Theres a few audio stores that sell cloth tubing like a sheath at any diameter to suite your wire. The larger the gauge wire the better , more metal in essence. Im using The uninsulated strand of copper from a length of romex and some steel stranded wire/thick cable i found on a large spool in the basement. Make sure to insulate the separate layers meaning once wound from top to bottom take a piece of cloth and cover that whole layer and the wrap back up the iron bolt.

This will yield a reasonable ammt of power as it is if one wets it. Our highest readings were somewheres around .9 v 80 ma so plenty to run a few novelties but here is the good part.

A layer of insulation cloth should be placed around the primary when completed and the the secondary should be wound on that. Single peice of wire most of us are using magnet wire if that far, and bruce has some litz left which should be cool. after that is wound with as many layers as wanted the secondary should be secured. The secondary wire can be insulated in mica, varnish plastic or any of the normal ones.

So you wet the thing down, take one lead of the copper from the primary and one lead of the steel wire and touch them together. if this connection is held it makes what NS reffered to in the patent as a SELF SUSTAINING ELECTROMAGNET. the secondary in turn is hooked up to a mic or telegraphic relay .

The EARTH BATTERY is actually what he refers to as a PRACTICALLY SELF GENERATING INDUCTION COIL. It states All that is needed to Make This device work is the normal make and break of the connection between the wires 5 and 6 in the patent which are the copper and the steel/iron wires from the primary their other ends are just left free not touch to preserve the character of the electrodes it states. Now when you make and break that connection in the primary it disturbs the secondary and ac voltage/ current shows up on the secondary wire ( Litz or magnet wire).. The faster i did it the higher the ac readings were from the secondary. So with a relay to preform this function or a passive rotary spark gap this can be achieved.

[edit on 1-3-2008 by Localjoe3]

[edit on 1-3-2008 by Localjoe3]

[edit on 1-3-2008 by Localjoe3]

[edit on 1-3-2008 by Localjoe3]

[edit on 1-3-2008 by Localjoe3]

CONT


This is where were at now and working on both avenues, The relay can be built into the cell itself on the top with a springy piece of metal and a contact point. when the connection is made the center bolt will act as an electromagnet momentarily and suck the springy metal towards it breaking the connection and releasing it back to the contact point for the process to happen over and over again. The "relay" is self powered from the copper and steel/iron terminals from the primary. This is one testing route im working on.

I think it would be more promising if someone were able to use a rotary gap on a hobby motor powered by a double a or something with a potentiometer on it to adj speed/freq that way the output of the secondary could be tuned since it directly relates to the speed of the making and breaking of the primary.
Feel fee to ask us for pics or whatever else you need to get started if you want to build one. But electronics knowledge is always appreciated even if you don't have time to build Wink Smiley
Thanks for your interest,
Joe

Stubblefield patent link
My Earth Battery thread at Overunity.com
[edit on 1-3-2008 by Localjoe3]

[edit on 1-3-2008 by Localjoe3]

More Findings of mine

@ All

lines 62-85 on page 2 Of the patent are the most important part to understand i feel after the construction is completed. Unless you read this section very carefully its easy to pass over a few key points.

He described physically 2 configurations of his device

1) ***practically*** a self-generating induction-coil- practically is the part i will get to in a moment - practically meaning almost!




I cant believe i finally figured this freakin patent out this was defiantly hidden in a way so the normal person would pass over.

in lines 63-75

The magnetic field produced by the current traversing the coil-body 4**(the inner bifiliar wind) induces a secondary current in the solenoid or secondary coil 12,
when the ordinary make and break of the primary current produced within the coil 4 is made between the terminals of said coil 4. It will therefore be seen that the construction
of the battery illustrated in Fig. 4 is practically a self-generating induction-coil..

In english We need a mechanical spark gap driven by a small dc motor or something that will accomplish the same task of mechanically doing this task as quoted "When the ordinary make and break of the primary current produced within the coil 4 is made between the terminals of said coil 4" It will therefore be seen that the construction
of the battery illustrated in Fig. 4 is practically a self-generating induction-coil.. THAT IS WHAT THE PRACTICALLY IS.. Something that makes and breaks the connection with the primary therefor inducing a secondary current (AC) in outer secondary wind... The speed of the primary relay/rotary gap sets the freq and output for the ac as well as teh secondary wire length.. what happens when you drive a secondary resonantly... the power used is much less than the input needed.

So what this patent says is you can have a self generating induction coil as long as you preform the normal make and break of the primary terminals DUH..


2) a self-sustaining electromagnet

Lines 76 -86

It will also be obvious that by reason
of the magnetic inductive properties of
the coil-body 4 the core-piece 1 will necessarily
be magnetized while a current is going
through the body 4, so that the battery
may be used as a self-generating electromagnet,
if so desired, it being- observed that to secure
this. result is simply required connecting
the extended terminals of the wires 5 and
6 together after wetting or dampening the
coil-body.

This makes sense this version is how the wireless phone worked .. yay two for 1 yay anyways the difference is this one has one set of copper and iron wires from the inner coil shorted so as to make this an electromagnet. When you connect a microphone to the secondary wires or a telephonic relay ... it will transmit .. this must be the base station model..

Lines 58 -62

***the solenoid or secondary coil may be connected up with any instrument usually operated by secondary
currents—such, for instance, as a microphone
transmitter or telegraphic relay.***

This Is describing the latter invention the Self Sustaining Electromagnet

Now hopefully everyone sees how clever he was when he hid how to make it a self generating induction coil.. within the instructions for the base station transmitter...sneaky sneaky

It took a while because the workings of the two separate inventions are not in order when you read the patent and are mixed up.. weird.. classic tesla

[edit on 1-3-2008 by Localjoe3]

[edit on 1-3-2008 by Localjoe3]

If anyone comes to join us and starts reading, start at about page 70 thats where we all consistently started working on stubblefield cells and its at like page 100 now but that will save folks some time of weeding through all our initial testing.
Thanks again
Joe

God bless you.

Here is something to chew on,Edgar Cayce recalled in a former life forging iron,magnisium laced coal.electrifying the molton iron while it cooled to produce a magnetized metal.Used applied over body parts while electricity was sent through the metal to induce healing.


Love to know if this could even produce a magnetic metal,might be why kissinger never ages.Ha.

@all

Does anyone here think the Stubblefield work and research ive been doin deserves a thread of its own here i was going to post it but had some reservations i guess my starting token for it would be how his patent physically describes 2 sepearte devices.

The High Frequency/high voltage output of the earth battery in its induction coil form is what powered the parabolic heating "bowls in his house"

As well thoughts on his multiple wireless systems for radio and his security device that was basically and intruder alert. He had a table about the size of 4 chess boards that had pith balls setup incrementally in a grid fashion under it was a topo map of his plot. The pith balls swung in the areas where there was movement.

Joe

reply to post by Localjoe3


Post it anyway.

I get some people who read my threads, and occasionally i may get 20 responses. People don't want to work to hard for their information, so if you post a link you need to summarize in a quote i think.

Regardless, this is a place i can warehouse my ideas and research. I doesn't matter if anyone is interested in reading it or not. I get more compliements on my avatar, for some reason, then for finding information on cloaking and anti-grav research by NASA.