It looks like you're using an Ad Blocker.

Please white-list or disable AboveTopSecret.com in your ad-blocking tool.

Thank you.

 

Some features of ATS will be disabled while you continue to use an ad-blocker.

 

Good position!!!

page: 1
0

log in

join
share:

posted on May, 21 2006 @ 08:11 PM
link   


I don't would like to be at the place of pilot



posted on May, 21 2006 @ 08:48 PM
link   
hehe. So much work went into producing that aircraft, and maintiance brings it down!!



posted on May, 21 2006 @ 09:07 PM
link   
I can only imagine the "strip" that was verbally torn off those responsible by the late "Kelly" Clarence Johnson... a man of "language colourful" by some accounts... such a D'Oh... is that a 12 or a 71?



posted on May, 21 2006 @ 09:17 PM
link   
According to what I can find, it was an SR-71. Supposedly they were doing a hydraulic test, turned the system on, put the gear handle up, and someone forgot to install locking pins in that strut to keep the gear from retracting.



posted on May, 21 2006 @ 09:29 PM
link   
Thanx Zaphod58... I couldn't tell from the photo whether it was a dark colour or a lighter colour and the photo just made it look that way. Either way a magnificent technical achievement... makes one wonder what's in the classified inventory all these years later.

Thanx,

Victor K.



posted on May, 22 2006 @ 12:50 AM
link   
not a nice pic but a new pic...
Good explanation zap...



posted on May, 22 2006 @ 12:54 AM
link   
Back in the day . . . when I was a plane captain, locking pins were the first thing you did after shutdown. I can't imagine doing any maintenance before securing the bird. Man, have times changed!



posted on May, 22 2006 @ 01:01 AM
link   
They're installed before the planes are shutdown, however for some maintenance problems they are removed before troubleshooting, or working the problem. It was PROBABLY the Landing Gear Position Indicator, which means they would have had to jack the plane and retract the gear hence the downlock removal. They then would have had to move the gear handle with weight on the strut to make sure that the indicators worked. After dropping the jacks, they probably forgot to reinstall the downlocks.


Note- This is speculation on my part, but the biggest reason to remove the gear pins is because they have to jack the plane and retract the gear while it's on jacks.

Note 2- When the SR came down it was a couple of thousand degrees due to the high speed. The crews would have to wait several hours to work on them, while they cooled down. It's also possible that they COULDN'T install the gear locks until it cooled, and they immediately started working the problem it had, and they never got installed.

[edit on 5/22/2006 by Zaphod58]



posted on Jun, 13 2006 @ 10:17 PM
link   
That particular serviceman got more than he bargined for. Some information I read stated his superiors were just short of throwing him off the base and out of the service right then and there. Let's just say he couldn't sit down for awhile, if you know what I mean.
Either way, 'That's one way to end your career'.







 
0

log in

join