It looks like you're using an Ad Blocker.

Please white-list or disable AboveTopSecret.com in your ad-blocking tool.

Thank you.

 

Some features of ATS will be disabled while you continue to use an ad-blocker.

 

Didn't You Say That Newbies Couldn't Fly Jets Into WTC ??

page: 3
11
<< 1  2   >>

log in

join
share:

posted on Aug, 13 2018 @ 02:29 PM
link   
a reply to: manuelram16

He was also qualified on towing and other things on the aircraft. And yes, you start engines in the simulations. As for steering, if it uses a steering tiller it's a handle down by the pilots leg. It's just like steering a car.



posted on Aug, 13 2018 @ 02:42 PM
link   

originally posted by: manuelram16
so second question comes up, plane was a Turboprop how did the bozo started the engines ?


With the checklist that tells you what to do and in exactly which order. I had my mechanic's license for over 20 years. You don't do a thing to an aircraft without the proper manual in hand. If I have the manual or the checklist there isn't a plane that I couldn't start.



posted on Aug, 13 2018 @ 02:47 PM
link   
a reply to: JIMC5499

And the checklists are usually kept sitting in the cockpit if they're paper copies, or are pulled up on an MFD if they're electronic.
edit on 8/13/2018 by Zaphod58 because: (no reason given)



posted on Aug, 13 2018 @ 02:49 PM
link   

originally posted by: samkent
Worker Steals Plane and does Loops and Barrel rolls

Not bad flying for someone who has never flown a plane before !
This guy started the engines and backed out to line up on the taxiway.
Then he took off without permission.
Put on a great aerobatic show.
Then intentionally plowed the plane into the ground away from the public.

Just goes to show you don't much experience to crash a plane into a target.





posted on Aug, 13 2018 @ 05:04 PM
link   
Plus there are videos online on how to startup and configure the dash 8.

The non believers should try a demo flight at their local airport.
They would be very surprised how easy it is to fly.




top topics
 
11
<< 1  2   >>

log in

join