posted on Feb, 2 2005 @ 03:01 PM
Lets just say I have to many pokers in the fire right now all my projects are in stages of being done but none finished. What project do you think I
should work on that would prove out to be the most useful.
I personally think the anti personal round has good promise but because it is designed to brake/expand in the target it can't be used in open
warfare. But it could be used in counter terrorist actions or by police/swat. No I can't show you pictures or video of the test firings of the rounds
just incase I might be able to patent it later on. But I will let you see what the target looked like after it was hit.
current projects
Anti Personal Round - best used in shot guns but can be used in other weapons. Test with a .22 wound tracks of around .97 with some fragmentation.
Shot gun rounds 12ga 2 size variations large size close range shell 6 per shell wound track path with a diameter of 3 inch with round braking up
inside the target. Med range shell holds 18 per shell leaving 1.5 - 2 inch diameter wound tracks with round braking up inside the target.
Pic is from a early test the round broke up to early. There is no pressure sensitive dye in the gel.
Body armor Cooling system - using a wicking material with active closed loop water cooling with a average of 40-120 gallons a hour flow rate and run
time of around 3-8 hours depending on speed of flow. weight of system 8.5 pounds. estimated 140-300 watts of heat transfer away from the body.
Sense this is on a military kind of topic though I should post here if not move it at your will.
[edit on 2-2-2005 by shadarlocoth]